欧盟空气质量监测现状及加强我国空气质量监测体系建设的建议

从欧盟空气质量监测政策和监测网络建设现状两个方面描述了欧盟空气质量监测发展现状。分析了我国空气污染现状和空气质量监测体系中存在的问题,并借鉴欧盟的经验,提出了加大政策支持和财政保障力度、逐步健全空气质量监测网络体系、加强空气质量监测技术研究、完善空气质量监测数据库、开展能力建设、提高公众参与度等加强我国空气质量监测体系建设的建议。     

太原汾河景区跨桥断面水体污染的时空变化模式研究

选取太原汾河景区跨桥断面8个监测点,在2012年3月—2013年10月期间对河流8项水质参数进行监测,并结合派生的水体综合污染指数及主成分分析方法分析和评价景区水污染时空变化特征。结果表明,景区水质污染变化时空差异明显,上游污染相对较小,下游污染较重;春季溶解氧和p H值变化幅度最大,夏季除总氮和氨氮外,其他各污染物均有显著变化特征,秋季则以氨氮、总氮和总磷变化最为显著。主成分分析结果显示,虽然各监测点水体污染的关键影响因子不同,但总磷是太原市河流水体污染的共同解释因子。     

生活垃圾焚烧发电厂周边环境二噁英污染水平及人群暴露评估

选取某典型生活垃圾焚烧发电厂为研究对象,监测其周边环境空气、土壤、地下水、农作物等环境介质中二噁英的浓度水平,初步评估周边人群二噁英暴露水平。研究结果表明,该厂周边环境空气、土壤、地下水中二噁英测定值分别为0. 236 pg TEQ/m3～0. 331 pg TEQ/m3、1. 94 ng TEQ/kg～2. 71 ng TEQ/kg、0. 17 pg TEQ/L～0. 26 pg TEQ/L,企业排放的二噁英对周边环境影响较小;成人和儿童在暴露介质中摄入二噁英总量分别为0. 959 pg TEQ/(kg·d)和1. 59 pg TEQ/(kg·d),均低于4 pg TEQ/(kg·d)的标准,经大米和面粉摄入二噁英的量超过总暴露量的90%,提示食物是人群二噁英暴露的主要介质。     

松花江野生鱼类重金属残留分析与评价

以松花江流域的野生鱼类为研究对象,在松花江流域选取松林、大顶子山、佳木斯3个具有代表性的点位,在2014—2016年的每年5月底6月初采集鲤鱼和鲫鱼样品,3年内共制备45个鲤鱼单样,44个鲤鱼混样,30个鲫鱼混样,共计119个。采用电感耦合等离子体-质谱法对鱼类肌肉组织中残留的As、Cd、Cr、Pb、Hg 5种重金属进行检测。检测结果显示,As、Cd、Cr、Pb、Hg 5种重金属全部检出,检测结果全部达标,达标率为100%。根据检测结果采用单因子指数法和金属污染指数法等评价了松花江流域鱼体重金属残留状况及食用安全性,评价结果为松花江流域鱼类重金属残留量相对较少,鱼体健康,食用安全。     

Investigating the quantitative and qualitative status of effluent in the wastewater treatment plant in Iran Central Iron Ore

The aim of present study was to investigate the quality of the produced effluent from different units of the Iran Central Iron Ore in Bafq city and comparison of effluent with the standards. This study presents the physicochemical and biological parameters data of effluent of three Sequencing batch reactors (SBR) with a capacity of 160 m³?d^?1. Most common parameters include pH, total suspended solids (TSS), total nitrogen (TN), total phosphorus (TP), biochemical oxygen demand (BOD₅), chemical oxygen demand (COD), heavy metals, and total coliforms and fecal coliforms as biological indicators. Then, for each SBR system, the average of each parameter was determined, and results were compared with the standard recommended by the Iranian Environmental Protection Agency. Based on the results, some of the parameters, including BOD₅, COD, and TSS in the wastewater treatment plant (WWTP) effluent, are higher than the permitted amount for discharge to the surface water. Considering the BOD₅, COD, and TSS concentration in WWTPs, the treated wastewater is only suitable for agricultural and irrigation use. Therefore, wastewater produced by Iran Central Iron Ore Co. will need additional treatment to achieve standard quality of water before discharge in surface water and adsorbent well.     

国家生态环境监测“十四五”展望

"十四五"时期,生态文明改革持续深入,生态环境治理将向精准治污、科学治污、依法治污转变,这对加快推进生态环境监测体系与监测能力现代化提出了迫切要求。因此,本文从网络建设、体制机制、服务效能等方面,对生态环境监测所取得的进展与成效进行了系统分析,并对国家生态环境监测面临的机遇与挑战进行了深入剖析。在此基础上,针对支撑评价排名、服务精准治污、有序衔接新职能、建设大数据平台、强化数据应用、深化综合评价、理顺体制机制、推动产学研用、提升基础能力等方面,提出了"十四五"期间国家生态环境监测发展的相关建议。     

土壤污染风险规制中的行政裁量研究

我国土壤污染风险规制在专家遴选标准、建设用地和农用地污染风险管控要求，以及风险管控措施等方面存在不同程度的行政裁量。社会理性和科学理性的缺失形成了土壤污染风险行政裁量困局。土壤污染信息制度中“适时公开”的规定使得公众缺乏必要污染信息，弱化其参与程度，导致对行政决定合法性的质疑。此外，土壤污染风险管控标准中专家遴选标准和论证规则的欠缺导致土壤污染风险规制科学理性的缺失。为此，需要建构关照事实和规范的协商式行政裁量模式，强调公众的实质性参与以弥合技术理性和公众理性的鸿沟。同时，在程序上确定专家遴选标准和风险管控标准的论证规则以保证土壤污染风险管控的科学性和客观性。在不妨碍行政裁量权灵活性和能动性的前提下，规范行政裁量权的行使，控制行政裁量权的滥用。     

Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

我国高速公路周边土壤重金属污染现状及研究进展

以我国高速公路周边土壤重金属为研究对象，综述了我国高速公路周边土壤重金属污染特征、影响因素、来源、环境风险及其研究进展。高速公路周边土壤主要受Pb、Cd、Cr、Cu、Zn等重金属污染，主要呈现指数分布、偏态分布和两者混合分布等特点，并且受到土地利用、风向、地形、车流量等多种因素的综合影响。土壤重金属的来源除了受成土母质等自然因素影响以外，公路交通和周边工农业活动也会对其来源产生较大影响。传统的土壤重金属评价方法主要采用单因子指数法、地累积指数法、生态风险评价法等对重金属的污染等级和环境风险进行评价。未来的研究应将重金属形态分析、空间和地统计分析、重金属稳定同位素示踪和源解析模型以及预测模型等多种手段相结合，开展高速公路周边土壤重金属的污染特征、时空分布、来源及预测预警研究等，为我国高速公路沿线工农业生产布局及其土壤重金属污染防控提供科学依据和决策支撑。